What should be paid attention to in the daily maintenance and care of the Honing Head

The maintenance of the Honing Head directly affects the processing quality and service life. After each use, the residual metal chips and abrasive powder should be cleaned in time to avoid clogging the pores of the oilstone. You can use a soft brush with a special cleaning agent to clean it, and do not use sharp tools to scrape it.

Keep a dry environment during storage to prevent rust. It is recommended to apply anti-rust oil and then put it in a special packaging box to avoid collision damage. When there is obvious wear or cracks on the surface of the oilstone, it needs to be replaced in time, otherwise it will affect the processing accuracy.

Before use, check whether the expansion and contraction mechanism is flexible and whether the screws of each component are loose. During processing, pay attention to the operating status of the honing head. If there is abnormal vibration or noise, stop the machine immediately for inspection. Measure the processing size regularly. The decrease in accuracy may be a signal of wear of the honing head.

The coolant should be kept clean and replaced regularly. Coolant mixed with impurities will accelerate the wear of the honing head. The Honing Head that has not been used for a long time should be removed from the oilstone and stored separately to avoid long-term compression and deformation of the elastic element.